รายละเอียด
QSC E15 Passive Loudspeaker 500W (Discontinued)
ลำโพง QSC E-Series E15 เป็นตู้ลำโพงแบบ 2-way ขนาด 15 นิ้ว ทนกำลังขับ 500 วัตต์ continuous 2000 วัตต์ peak 8 โอห์ม มุม 75 องศา (conical DMT), ตอบสนองความถี่ 55 Hz to 20 kHz (-6 dB) Dual angle pole socket
รุ่น E15 จะเป็นไดรเวอร์ 15 นิ้ว วอยซ์คอยล์ขนาด 3.5 นิ้ว ส่วนไดรเวอร์ขับเสียงแหลมจะใช้วอยซ์คอยล์ขนาด 2.8 นิ้ว เพาเวอร์แอมป์ควรจะมีขนาด 500 ถึง 2000 วัตต์ หากใช้ค่ากลางๆ ใช้ประมาณ 1000 วัตต์ เพราะค่า Continuous จะอยู่ที่ 500 วัตต์ ส่วน RMS ก็ประมาณ 1000 วัตต์ เพราะว่าที่จริงเราไม่ได้ใช้วัตต์พีคถึงขนาดนั้นอยู่แล้ว ซึ่งวัตต์ที่เกินกว่า 500 ก็ถือว่าเป็นเฮดรูมสำรองไว้เวลาเกิดฟีดแบ็กหรือรองรับการขับหนักๆ
เครดิตจากหนังสือ Sound Stage ลำโพง QSC E-Series >> http://goo.gl/RqlSnW
The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTMwaveguide assures that even distant listeners will be well covered.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
Features:
- High output, professional quality sound with E15 – 500 W continuous power
- E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers
- Titanium diaphragm for high fidelity and long life
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- Available U-Style Yoke and M8 rigging kit for permanent installation
- Dual angle pole socket
Model |
E15 |
Configuration |
1 x 15-inch, 2-way, non-powered |
Frequency Response (-6 dB) |
55Hz – 20kHz |
Frequency Range (-10 dB) |
43Hz – 20kHz |
Power capacity²: continuous/peak |
500 W / 2000 W |
Sensitivity |
97 dB, 1 W @ 1 m |
Coverage Angle |
75° conical DMT |
Output1 (peak SPL @ 1 m) |
130 dB |
Drivers
LF
HF
|
381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver
|
Nominal Impedance |
8Ω |
Cross-over |
Full-range only 1.55 kHz |
Input connectors |
2 x NL4, 1 x barrier strip |
Enclosure |
Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining. |
Mounting and suspension |
6 x M8 suspension points, dual angle, 35 mm pole-socket |
Net weight |
31 kg / 68 lbs |
Shipping weight |
34 kg / 75 lbs |
Dimensions
(WxHxD) |
420 x 716 x 445 mm
16.5 x 28.2 x 17.5 in
|