|
Sensitivity for full rated power
|
1.4 Volts RMS or 0.775 Volts
|
|
Frequency Response 20 Hz to 20 KHz
|
1dB at any power level
|
|
Signal to Noise ratio 20 Hz to 20 KHz
|
More than 103 dB
|
|
Total Harmonic Distortion (THD)
|
0.1%
|
|
Intermodulation Distortion (IMD)
|
0.05%
|
|
Damping Factor
|
600 From 20 Hz to 400 Hz. (at 2 ohms load)
|
|
Load Impedance
|
Safe with all types of loads
|
|
Output power stereo mode at 8 ohm (stereo)
|
1000 + 1000 Watts RMS (both channels driven)
|
|
Output power stereo mode at 4 ohm (stereo)
|
2000 + 2000 Watts RMS (both channels driven)
|
|
Output power stereo mode at 2.66 ohm (stereo)
|
3000 + 3000 Watts RMS (both channels driven)
|
|
Output power stereo mode at 2 ohm (stereo)
|
3600 + 3600 Watts RMS (both channels driven)
|
|
Output power bridged mode at 16 ohm (mono)
|
2000 Watts RMS
|
|
Output power bridged mode at 8 ohm (mono)
|
4000 Watts RMS
|
|
Output power bridged mode at 4 ohm (mono)
|
7200 Watts RMS
|
|
Overload and short-circuit protection system
|
Current limited controlled by ACC at 65A per CH.
|
|
Overheat protection system
|
Cut-off at internal 85 Deg. Resume at 50 Deg.
|
|
Power Supply protection
|
Soft start - Against all severe voltage fluctuations
|
|
AC Input Voltage without affecting max. Output Power
|
200 V - 250 Volts AC. (when loading 2 ohms)
|
|
AC Input Voltage at moderate power operation
|
140 V - 250 Volts AC. (when loading 2 ohms)
|
|
Dimensions W x D x H
|
480 x 438 x 88 mm (2U. 19" Rack mount )
|
|
Weight
|
12.9 Kg.
|
