- เพาเวอร์มิกเซอร์ ขยายเสียง400x2
- 8CH BLUETOOTH USB/SD CARD mp3
- EFFECT 16DSP
- มีช่อง USB SD/MMC CARD เล่นเพลง MP3
- ขับลำโพง ดอก18 ได้ 1 คู่
การแก้ไขปัญหา เสียบสายไฟเข้ากับเต้ารับ AC อย่างถูกต้องหรือไม่ พลังไม่ได้เกิดขึ้น 'สายไฟและเต้าเสียบไฟ AC ติดตั้งอย่างถูกต้องหรือไม่? - กำลังเชื่อมต่อไมโครโฟนอุปกรณ์ภายนอกและลำโพงอย่างถูกต้องหรือไม่ 'เป็นตัวควบคุม GAIN ของช่อง, เฟดเดอร์ของช่องทาง, STE REO OUT Master fader ไม่มีการตั้งค่าเสียงและเฟดเดอร์ GROUP เป็นระดับที่เหมาะสมหรือไม่ 'เชื่อมต่อสายลำโพงอย่างถูกต้องหรือว่าถูกตัดให้สั้นลงหรือไม่? หากการตรวจสอบข้างต้นไม่สามารถระบุปัญหาได้โปรดติดต่อฝ่ายบริการ ศูนย์ เป็นตัวควบคุม GAIN ของช่อง, เฟดเดอร์ของช่องทาง, STEREO OUT Master fader และ GROUP fader ตั้งเป็นระดับที่เหมาะสมหรือไม่ 'มีเครื่องมือสองชนิดที่แตกต่างกันเชื่อมต่อกับแจ็ค XLR และแจ็คโทรศัพท์หรือ ต่อแจ็คโทรศัพท์และอาร์ซีเอพินของช่องเดียว โปรดเชื่อมต่อกับหนึ่งเดียว เสียงแจ็คเหล่านี้จาง ๆ เพี้ยนในแต่ละช่อง หรือมีเสียงรบกวน 'สัญญาณอินพุตจากอุปกรณ์ที่เชื่อมต่อตั้งเป็นระดับที่เหมาะสมหรือไม่ - คุณใช้เอฟเฟกต์ในระดับที่เหมาะสมหรือไม่? "ไมโครโฟนเชื่อมต่อกับแจ็คอินพุต MIC หรือไม่ หากคุณกำลังใช้ไมโครโฟนคอนเดนเซอร์นั่นคือสวิตช์ PHANTOM + 48V เปิด? ตรวจสอบว่าการควบคุมผลกระทบในแต่ละช่องได้รับการปรับอย่างถูกต้อง ไม่มีผลใช้ "ตรวจสอบให้แน่ใจว่าตัวควบคุม FX และเฟดเดอร์ผลได้รับการปรับอย่างถูกต้อง ฉันต้องการพูดคำ ปรับอีควอไลเซอร์ในแต่ละช่อง จะได้ยินชัดเจนมากขึ้น เชื่อมต่อลำโพงที่จ่ายไฟเข้ากับแจ็ค AUX หรือแจ็ค AUX1 หรือ 2 และ ฉันต้องการส่งออกจอภาพ เปิดสวิตช์ PRE บนแต่ละช่อง จากนั้นปรับสัญญาณเอาต์พุตโดย สัญญาณผ่านลำโพง ใช้การควบคุม AUX ในแต่ละช่อง เครื่องวัดระดับไม่ได้ "สวิตช์ PFL สำหรับช่องที่คุณไม่ได้เปิดใช้อยู่หรือไม่ แสดงสัญญาณเอาท์พุท ชั้น
Troubleshooting
's the power line properly plugged in to an AC wall outlet? Power doesn't come on
'Are the power line and AC wall outlet connected correctly?
-Are microphone, exteral devices, and speakers connected correctly?
'Are the channel GAIN controls, channel faders, STE REO OUT Master fader
No sound and GROUP fader set to appropriate levels?
'Are the speaker cables connected properly, or are they shorted?
af the above checks do not identify the problem, please contact the service
center
Are the channel GAIN controls, channel fader, STEREO OUT Master fader
and GROUP fader set to appropriate levels?
'Are two different instruments connected to the XLR-type and phone jacks, or
to the phone and RCA pin jacks on one channel? Please connect to only one
Sound is faint, distorted, of these jacks on each channel
or noisy 'ls the input signal from the connected device set to an appropriate level?
-Are you applying the effects at an appropriate level?
"Are microphone connected to the MIC input jacks?
If you are using condenser microphone, is the PHANTOM +48V switch
turned on?
Check that the EFFECT control on each channel is correctly adjusted
No effect is applied
"Be sure that the FX control and EFFECT fader are correctly adjusted
I want spoken words to
Adjust the equalizers on each channel
be heard more clearly
Connect a powered speaker to the AUX jack, or to the AUX1 or 2 jack and
I want to output a monitor
turn the PRE switch on each channel on. Then adjust the output signal by
signal through speakers
using the AUX controls on each channel
The level meter doesn't
"Are the PFL switches for the channels that you are not using turned on?
show the output signal
level
|