CN-3600 SE TECHNICAL SPECIFICATIONS

AC Voltage Input Range

• 180-270VAC, 50/60Hz

Maximum AC Current Rating

• 16 amps (Thermal breaker)

AC Cord

• 1.5mm2x3, 2.5m Long, black, IEC C19 Female to Schuko CEE 7/7 Male Plug

AC Receptacles

• Rear Panel Outlets: 1 IEC C13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay)
• Front Panel: 1 IEC C13 (Unswitched)

Surge/Under-Overvoltage Protection

• AC Surge Protection: Series Multi-Stage Protection SMP
• Spike Protection Mode: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 375V peak @ 6,000 volts/3,000 amps
• Response Time: 1 nanosecond
• Maximum Surge Current: 6,500 Amps
• AC Undervoltage Protection: EVS, 175VAC+/-3VAC
• AC Overvoltage Protection: EVS, 275VAC+/-5VAC
• AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)

AC Filtering

• LiFT
• Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz

Operating Temperature Range

• 5C (40F) to 40C (105F) degrees

Humidity Range

• <90% rH (Relative Humidity)

User Interface

• Keyswitch: Front panel, 3-position keyswitch (On, Off, Remote)
• Keys: Included, 1 pair
• Pushbutton Switch: Front panel, hidden by security cover
• Circuit Breaker: Front panel, pushbutton, 20A Thermal Breaker
• Front panel diagnostic indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
• Front Panel DIP Switches: Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
• Potentiometer: Front panel, hidden by security cover, fine tune delay adjust

Control/Status/Triggering (Rear Panel):

• Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
• SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000’ nominal)
• Remote Terminal: Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
• Force Off/Delay 3 Terminal: Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
• RS-232 Compatible: Yes, DB-9 Connector
• IP Addressability: Optional, via BB-RS232 Ethernet/RS-232 Adaptor (sold separately) for IP control via Telnet, HTTP, BlueBOLT®
• Voltmeter: Available with RS-232/Ethernet option, ± 2VAC accuracy
• Ammeter: Available with RS-232/Ethernet option, ±1A accuracy

Power Consumption (No Load):

• 10 Watts

Safety Agency:

• NRTL-C, RoHS Compliant