Technical Parameters
Input
MIC 2 k ohm Balanced Input impedance
Line 10kohm Balanced
MIC continuously variable from OdB to +50dB Input gain
Line-Mono Channel continuously variable from -15dBto+35dB
Maximum input level MIC +22dBu
Line(Mono Channel)+22dBu
Insert send impedance 120 ohm Unbalanced
Insert send level/Max -10dBu/+22dBu
Insert return impedance 10 k ohm Unbalanced
Insert return level/Max. -10dBu/+22dBu
CMR at 1 kHz Line(20Hz-20kHz) >60dB
MIC to Mix 20Hz-20kHz +/-3dB Frequency Response
Signal/Noise Ratio(20Hz-20kHz) MIC EIN ref.150ohms - 117dBu
System Noise(20Hz-20kHz)
Summing noise -90dBu(24channels routed with faders down)
Line to Mix Noise 86dBu(24 channels routed at odB, pan center)
Distortion at 1 kHz MIC to insert(+30dB unity gain, +20dBu output)<0.009%
Mix to Mix(+30dB unity gain, +20dBu output)Typ 0.03%
Crosstalk at 1 kHz Channel to channel >-80dB
Mix to Mix >-80dB
Channel to Mix >-80dB
Fader Attenuation >100dB
Output(nominal signal level mic-50dBu to OdBu -Line OdBu)
Output impedance All line outputs 120 ohm Balanced
Insert send impedance 120 ohm Unbalanced
Insert send level/Max
+22dBu
Insert return impedance 10 k ohm Unbalanced
Insert return level/Max
+22dBu
Maximum output level master outputs on XLR +28dBu
All outputs on 1/4" jacks +22dBu
Headphones
+22dBu/600 ohm
Main Mix Section
HI-shelving
+/-15dB@12 kHz
MID HI-bell(STEREO)
+/-12dB @3 kHz
MID-bell(MONO)
+/-12dB frequency range 100Hz- 8KHz
MID LOW-bell(STEREO)
+/-12dB@500hz Bass-shelving
+/-15dB@80Hz
Hi Pass Filter Slope
-18dB/Oct.@75Hz
Power Supply
Power Supply
110/220V
Active Only 50~60Hz
2x550W