MP3 OPERATING INSTRUCTIONS
1.BLUETOOTH CONNECTION
a.Press the " MODE " button in order to select the Bluetooth mode, after the success of the selection, the Bluetooth icon on display is flashing, and display BT.
b.Open the Bluetooth for pairing, after the success of the pairing, there will be a sound prompt. 2.BUTTON FUNCTION
a."H /REC" button, press first time to pause the playing song, press again to continue playing.
b."I/-" button, short press to play the previous song, long press to reduce the input volume.
c."-/+" button, short press to play the next song, long press to increase the input volume.
d.[MODE] Selecting button, switching the functional model, select USB, REC, BT in order.
3.USB RECORDING OPERATION
a.Press the " MODE " key to select the REC state.
b.Press the "Y /REC " button to start recording, the LED screen shows the recording time,
Press the "M /REC " button again to pause the recording.
c.Press the " MODE " key back out the recording.
4.COMPUTER SOUND CARD
When connect the computer data cable, it will enter the PC playing states automatically(The computer will install the
driver automatically at the first connection, need to wait until the installation finish, to play or record)
USB FOR DATA TRANSFER AND RECORD, AND POWER SUPPLY
Data transfer
and record
PC Play and RecordUDisk Piay and Record
DC 5V/1A
Power supply
.PC USB PowerBank Pomer Socket Power Supply
USB FOR POWER SUPPLY ONLY
Connected with PC USB port, Power DC 5V/1A
bank or power socket to supply power
to mixer.
It must meet the following requirements:
Output voltage: 4. 8V to 5. 2V Power Bank Power Socket
Output current: 1A or even more
GENERAL SPECIFICATIONS
LST OF 16 DIGITAL EFFECTSIFOR SOVE WODELSE Frequency Response 20Hz-20KHz +1dB+4dBu@1KHz
HALL1
Total Harmonic Distortion <0.5%@+4dB (22Hz -22KHz)
HALL2
Channel 6-CH
ROOM1
MIC 2(XLR+6.35Jack)
ROOM2
STEREO 2(3-4/5-6) Input
REVERB+DELAY
Channels MP3
125MS DELAY
USB Sound Card 2.0Type-A
175MS DELAY
Bluetooth
225MS DELAY LR(6.35Jack) Output Main OUT
285MS DELAY Channels 1(3.5Jack) Phones OUT
560MS DELAY
HIGH: Gain/+15dB、 Frequency :12KHz sheiving Input EQ/2-band
S60MS DELAY LOW:Gain/+15dB、 Frequency : 80Hz shelving Channel
Function 1000MS DELAY
Peak LED LED turs on when post EQ signal
1400M4S DELAY reaches 3dB below clipping level
SOOMIS PINGPONG DELAY Phantom Power Voltage +48V
Power Input 1OO0MS PINGPONG DELAY EXT.DC IN:5V-1A/2.0T ype-A
Power Consumption 1400MS PINGPONG DELAY 5W