Overview
The Allen & Heath GL2400-440/X live sound reinforcement consoles exhibit the quality and detail synonymous with consoles that would render some live sound rigs over budget. The Allen & Heath GL2400-440/X is available in a 40 input chassis with a compact enclosure ideal for any custom, portable flight case. GL2400-440/X complete with 40 line inputs, 40 microphone preamplifier's, and 4-buss group routing. There is absolutely no shortage of routing possibilities with 2 stereo input channels, 6 Auxiliary sends and a 7x4 routing Matrix section. Also featured are 1/4" phone TRS inserts on all input channels, auxiliary sends, and stereo master output. Direct outputs via 1/4" phone connectors are provided on every input channel, enabling input signal to be routed directly to multitrack recorders, monitor mixers, etc. Each input channel features a 4-band semi-parametric EQ, complete with In/Out switch. A HPF filter switch attenuates frequencies below 100Hz by 12dB per octave. The main output section consists of Left, Right and Mono outputs via balanced 3-pin male XLR connections. The combination of stereo and mono outputs allows the engineer to mix a stereo image while sending mono signals to subs or a separate center (or "C") channel mix. Allen & Heath GL2400-440/X now can be bought in vincent maestro online shop with a typical buy cheap wholesale prices.
Features:
- L/R and M main outputs
- 4 audio groups with pan control
- 6 auxiliary sends with per-channel pre/post fader switching
- 2 stereo channels each with mic and dual stereo line inputs
- 7 x 4 matrix
- Proper dual functionality for FOH and/or monitor mixing
- M can be configured as L/R sum, wedge, or aux-fed sub or C master
- Recording capable with channel direct outputs
- Matrix external inputs with level trims and common input capability
- Stereo channel line inputs can be independently routed to L/R
- Stereo channel mic input breakpoints for cross patching into matrix
- Responsive 4-band, 2-sweep EQ
- 100Hz channel highpass filters
- Individual phantom power and polarity switching
- Dedicated Channel, Master, and stereo Monitor meters
- Internal jumper plugs for pre/post-EQ aux, direct out, and other options
- Mutes, meters, and AFL on all fader masters
- Assignable talkback
- 1kHz oscillator and pink noise generator
- 2-track monitoring and replay to L/R
- Headphones and local monitor outputs
- Electronically balanced XLR outputs with +26dBu drive capability
- Preamp +34dBu maximum input capability for mic or line
- Ultra low-noise mix head amp design
- Internal power supply with MPS12 backup supply input (16 to 32 models)
- 100mm dust protected faders
- Metal jacks, gold-plated XLRs, sealed pots and switches
- Individual circuit card assembly with nutted pots
- Solid copper bus bar grounding
- Sys-Link V2 console linking option
- 4-pin XLR lamp sockets
Specifications:
- Number of Channels: 40
- Mic/Line Inputs: 40 Line: 1/4" Phone / 40 Mic: 3-pin XLR
- Stereo Line Inputs: 4 Stereo: L/R 1/4" Phone
- AUX Sends: 6 Aux Sends: 1/4" Phone
- Inserts: 40 Line: TRS 1/4" Phone / 4 Group: TRS 1/4" Phone / 2 Stereo Out: TRS 1/4" Phone
- BUS (Group) Outputs: 4 Group Outputs: Balanced 3-pin XLR
- 2 Trk Master I/O: Main Outputs: Left / Right / Mono (sub) Balanced 3-pin XLR / 2Trk In: L/R 1/4" Phone / 2Trk Out: L/R 1/4" Phone
- ALT I/O: Matrix - 4 EXT In: 1/4" Phone / 4 MTX: 1/4" Phone
- Monitor Outputs: Monitor Out: L/R 1/4" Phone
- EQ Section: Gain (each band): +/- 15dB
- Mono Channels- Low: Shelf 80Hz
- Low Mid: 35Hz - 1kHz Q=1.8
- High Mid: 500Hz - 15kHz Q=1.8
- High: Shelf 12kHz
- Stereo Channels -
- Band Frequencies: 60Hz, 250Hz, 2.5kHz, 12kHz Q=1.8
- Filter (mono inputs): Switch 100Hz
- Solo/Mute: Mute / PFL on all channels
- Channel Level Control: 100mm faders
- Trim/Gain Control: Sealed Rotary Potentiometers
- Phantom Power: +48 Volt Phantom Power (all mono channels)
- Frequency Response: 20Hz to 30kHz / Mic to Main output (+40dB gain): +0/-0.5dB / Line to Main output (0dB): +0/-0.5dB
- Power Supply: External RPS11 linear, IEC input (exclusive to 40 channel model) / Input for second RPS11 as backup supply
- Dimensions (W x D x H): 48.5" x 10" x 25" (123.3 x 25.4 x 63.5cm)
- Weight: 70.5 lb (32 kg)
|