Main Mix Noise 20Hz-20kHz bandwidth |
@ Line input selected at unity gain and 150 ohm termination |
Main Mix fader down, channel fader down |
-90dBu |
Main Mix fader unity, channel fader down |
-85dBu |
Total Harmonic Distortion (THD) |
-20dBu Input routed tomix, 1kHz @ +4dBu, 20Hz-20kHz |
0.004% |
Attebyatuib (Crosstalk) 1kHz relative to 0dBu, 20Hz-20kHz |
Channel fader down |
-84 dBu |
Aux down |
-80dBu |
Pan Isolation |
-70dBu |
Adjacent Channel Crosstalk |
-90dBu |
Frequency Response |
20Hz to 20kHz |
+0dB/-1dB |
Equivalent Input Noise (EIN) |
Mic in to Insert send out, max gain 150 ohm termination |
-129dBu |
Common-Mode Rejection Ratio (CMRR) |
Mic in Insert send out, max gain 1kHz : better than |
-85dB |
Maximum Levels |
Mic in / Line in |
+28dBu |
Stereo Input, Stereo Retum |
+26dBu |
Noninal Input for +4dBu at Mix output, Level at "7" |
4dBu(LO) |
Noninal Input for +4dBu at Mix output, Level at "7" |
-100dBu(HI) |
Impedances |
Mic in : balance XLR connector |
1.8k Ohms |
Line in : balance 1/4" JACK |
10k Ohms |
Stereo Input : balance 1/4" JACK |
10k Ohms |
Stereo Return : balance 1/4" JACK |
10k Ohms |
Input channel equalization |
15dBu Maximum cut or boost in each of 4 bands swept H-MID, L-MID |
Hi EQ |
12kHz |
H-MID |
swept 550Hz-13kHz |
L-MID |
swept 80Hz-1.9kHz |
Low EQ |
80Hz |
Phantom power +48V DC supplied via 6.8kW current limiting/solationresistors to
balanced input For powering condenser microphones |
Dimensions |
Heigh |
102 mm |
Depth |
635 mm |
MX-803 |
Width 502mm/ Weight 12.0 kg (26.4lbs) |
MX-1203 |
Width 626mm / Weight 16.0 kg (35.2lbs) |
MX-1603 |
Width 750mm / Weight 19.0 kg (41.8lbs) |
MX-2403 |
Width 998mm / Weight 25.9 kg (56.9lbs) |